LIVE ON-SITE PUBLIC AUCTION
Saturday, April 15th 2023 @ 10:00AM
LOCATION: 10000 North River Dr. Newaygo, MI 49337 (Newaygo Co.)
DIRECTIONS: Take M-82 straight south of Fremont to Warner Ave., south 4 miles to 104th St., east ½ mile to N. River Dr., north 1 mile.
OR From Grand Rapids take M-37 north 26 miles to 112th St. (1 mile north of Grant), west 6 ½ miles to Warner Ave. (at Bridgton), north 1 ½ miles to 104th St., east ½ mile to N. River Dr., north 1 mile.
OR From Muskegon take Apple Ave./M-46 East to Maple Island Rd., north 9 miles to 104th St., east 1 mile to Dickinson Ave., south 1 mile to 112th St., east 1 ½ mile to Brucker, north ½ mile to 108th Ave., east ½ mile to Green Ave., north ½ miles to 104th Ave., east 2 ½ miles to N. River Dr., north 1 mile. (Newaygo Co.)
Due to a change in our lifestyle we have decided on a major downsizing and have commissioned Art Smith Auctioneers to sell the following listed items at Live/Online Auction here at our home. Thank you in advance for your time and support.
Best regards, Wes and Karen Meeuwsen
AUCTIONEERS NOTE: Wes & Karen lived together happily on the Hobby Farm for 33 years. Wes Meeuwsen’s 80 years of treasures of Tractors, Jeeps, Trucks and Tools will finally be available to the highest bidder. His lifetime collections have been stored in his many barns on site. Wes was an active member in several clubs including the 4 Wheel Drive Club (Jeep), Antique Power Club (Tractor) & Antique Truck Club. He very much enjoyed displaying his treasures at their summer shows. Wes is a man of many talents: Science Teacher, Scientist at Gerber Products for thirty years and a builder. You could find Wes after work, building and restoring vehicles in his 100 Year Old Barn on North River Drive. Be sure to make plans to be just north/east of Bridgeton on Friday for the inspection and Saturday for the Auction. Live Simulcast Bidding available on tractors & vehicles.
TERMS: Cash, good check OR Master Card or VISA with 5% service fee. We subscribe to Pay-Tec, (A NATIONAL CHECK COLLECTION COMPANY). All items sold in as-is condition. 10% Online simulcast bidding fee for online buyers only.
REMOVAL: All items must be removed from the Auction site by Saturday, April 29th @ 6:00PM, no exceptions! All items left at buyers own risk.
LOADER TRACTOR: Loader will be available on Auction day for equipment. Call Sam Church if loader needed Home: 231-834-7148 Cell: 231-292-2237
ONLINE BIDDING: Live/Online simulcast bidding on tractors & vehicles available live during Auction. Link to be posted here closer to Auction day.
ABSENTEE BIDDING: Can’t make to the Auction and don’t want to bid online? Absentee bids are also accepted from qualified bidders by contacting Noah 616-633 4254 [email protected] before Auction day.
INSPECTION: Friday, April 14th 3:00PM-5:00PM
AUCTION ORDER:
10:00AM: 2 Auctioneers selling Shop Tools & Collectibles
11:00AM: Tractors & Vehicles simulcast bidding
For your convenience we will have some off street parking, lunch trailer, port-a-jons, wash-up station.
TRACTORS:
1960 Allis Chalmers Mod. D-10, WF, 12.4X24” tires, 3pt. w/top link & cultivators #2461 (starts & runs)
1947 McCormick-Deering Mod. 06 gas, WF, 14.9X26” tires, orchard fenders #21960 (starts & runs)
1945 Farmall Mod. A, WF, wheel weights, 9.5X24” tires, fenders, NEW paint, PTO #117208 (starts & runs)
1948 John Deere Mod. M, WF, rebuilt engine, wheel weights, NEW 12.4X24” tires, fenders, power lift #24800 (starts & runs)
1950 John Deere Mod. MT, NF, 11.2X10-32” tires, power lift, fenders, #18062 (starts & runs)
1940 John Deere Mod. H, NF, flywheel start, fenders, 9.5X32” tires #11171 (starts & runs)
Late 1940’s Ford Mod. 8N w/loader, WF, 3pt., Sherman, fenders, 11.2X28” tires, side distributor #N/A (starts & runs, problem with low range)
McCormick-Deering Mod. 10-20, WF, steel rear & rubber front wheels, fenders #N/A (starts with pull & runs)
Mid. 1930’s Farmall Mod. F-12, NF, 12.4X38” tires, crank start #N/A (starts with pull, runs, flat tire)
Fordson tractor on 4 steel wheels #N/A (non-running)
1952 Allis Chalmers Mod. B, #121368 (starts with pull , runs, problem with ring rear)
1943 Allis Chalmers Mod. C, NF, 11.2X24” tires #C19343 (non-running)
SEMI TRACTOR:
1953 Mack B61, Thermodyne 6 cyl. diesel, single sleeper, twin screws, air brakes, wet kit #B61T1677 (always stored in pole barn, seen at many truck & tractor shows) (runs, has title)
JEEPS:
1949 Willys Overland Jeep Truck flat bed, 4X4, 4 cyl. #38484 (partially restored, runs, no title)
Approx. 1947 Willys CJ2, 4X4, V-8 Ford small block, manual (runs, no brakes, no title)
1986 Jeep J-20 4X4 pickup w/snow plow control & CB, V-8 automatic (non-running, has title)
1975 Jeep DJ, 6 cyl. automatic #5108879 (non-running, has title)
Late 40's early 50's Jeep pickup, 4X4 flat head 6 cyl. manual transmission (non-running, steering problems, no title)
(2) Jeep FC-170 4X4 (non-running, no title)
Early Jeep CJ Universal for parts (no title)
Willys Jeep tail gate
Jeep engines & parts
VEHICLES:
2003 Ford F-250 XLT Super Duty 4X4, V-8 7.3L Power Stroke Diesel, automatic, elect. brake, standard cab, 8’ box, 104k miles (1 owner, runs, has title)
1952 MG convertible, 4cyl. 4sp. manual, body 22381, #1427-84311 (non-running, has title)
MG 4 cyl. engine and transmission
1976 Ford Bronco Explorer 4X4, V-8, 3sp manual #U15GLB03452 (non-running, no title)
1965 Toyota Land Cruiser FJ40L, hard top & doors #34476 (runs, has title)
1962 International Scout 80 4X4, half cab, 4cyl. manual #FC59979A (runs, no clutch, no brakes, has title)
Cushman Truckster w/dump box, Vanguard 14hp twin, centrifugal clutch (runs)
DOODLE BUG:
Ford Mod. A doodle bug (starts with pull, runs rough, starter issues)
CRAWLER & DOZER:
Caterpillar Twenty Two crawler, gas (starts with crank, runs)
Caterpillar D-2 diesel bull dozer w/pony motor (non-running, pony motor not working, needs much work)
TRAILERS:
32” X 6’ small enclosed trailer
Shop built 4’6” X 12’ light duty tandem axle dump trailer, pintle hitch
HOOP FRAMED UNITS:
Approx. 40’X18’ hoop frame w/out canvas
Approx. 36’X15’ extra high hoop frame w/out canvas
EQUIPMENT:
3pt. 2bt. 12” plow
3pt. forks
3pt. field cultivator
3pt. 6’ disc
3pt. 6’ drag
3pt. 5’ brush hog
3pt. posthole digger
3pt. pull type PTO snow blower
6’ pull disc
Tractor front loader
Snowplow blades
Rope trip 1bt. Plow
Buzz saw
Towable generator (non-running)
NI #12 ground drive manure spreader (needs work)
Slip scoop
ANTIQUES, COLLECTIBLES & FARM PRIMITIVES:
Hardie wooden tank orchard sprayer w/McCormick Deering 18” db. Flywheel hit & miss engine
McCormick-Deering 11-hole grain drill on steel w/seeder
Wooden wheeled wagon
1-horse open cutter
Bull wheel corn binder (rough)
Dump rake
(2) Ground drive hay mowers (lawn ornaments)
Vintage floor jack
Decorative wrought iron
Steel wheel factory cart
Planet Jr. garden seeder
Double wash tub
Steel wheels
F-12 or 14 steel front & rear wheels
Windmill fan blades
Windmill tail
The New Huber thrashing machine on steel (rough)
Milk separator (lawn ornament)
Walking plow
Hand corn planter
(2) Steel wheel hand trucks
Mono chain saw
David Bradley chain saw
Maull #6 two man chain saw
Planet Jr. #119 push cultivator
Platform scales
Wooden spoke auto wheels
1-quart drum oil pump
Meat scales
Breast drill
Wood pulleys
Ice tongs
Wooden bar clamps
Neck yoke & eveners
Other items from past generations
SHOP & LAWN ITEMS:
Extra large quantities of shop tools: 100’s of sockets, wrench sets, pipe wrenches, channel locks, screw drivers gear pullers, vise grips, welders vise grips, impact sockets, hammers, etc. etc.
Large quantity of power tools: drills, saws, sanders, grinders, hand planer, miter saw, jig saw etc. etc.
Hobart Handler 187 wire feed welder w/Argon/Carbon Dioxide tank
Lincoln 225 arc welder
Solar 20/40 Amp plasma cutting system
LP/Acetylene torch set
NEW acetylene torch set, in box
NEW 12-ton pipe bender w/attachments
20-ton hyd. shop press
Industrial flat belt drill press
Spot welder 115V
40” sheet metal brake
48” metal brake
60” metal brake
Craftsman jointer
Delta table saw
Horz. band saw
110V elect. hoist
Winch mount, NEW in box
NEW port-a-power
NEW slide hammer puller set
Sawzall
Belt/disc sander, bench mod.
Porter Cable Porta Plane
Metal chop saw
Power hack saw
Sand blaster cabinet
Metal lathe
26” wood planer w/out motor
Bench grinder
5” bench vise
200’ fish tape
Ram set
Bolt cutter
(2) Laser levels
Transit w/tripod & stick
End wrenches & sockets up to 2”
Calipers
Welders mask
Several tripod garden sprinklers
Halogen lights on stand
1bu. & 1/2bu. Baskets
10-drawer Kennedy machinist tool box
Body shop tools
Dozens of air shop tools
Portable air compressor
9HP pressure washer
Karcher HD5-955 steam cleaner
Snatch blocks
Fair Cable lead
Many tool boxes, some full of tools
Roll-a-bout tool boxes
Heavy duty elect. cords
Bench drill press
Hyd. floor jacks
Jack stands
Grease guns
Huge quantity of nuts, bolts, washers etc.
Several chain falls
Cherry picker/engine lift
Sm. anvil, 12” long, 4” face
Pipe vise on tripod
112-unit bolt bin full of NEW bolts & nuts
100-drawer unit full of hardware
Screw jacks
Shop carts
Paint gun washer
Parts washer
Wire feed welder
Lawn cart
Large hyd. floor jack
Oil filters
Sandpaper
Battery charger/engine starter
Dayton welder
12V lawn spray on wheels
Manual tire changer
Bubble tire balancer
Hyd. oil
(2) Shop built lawn rollers
Push gas leaf blower
Pallet jack
Garden sprayers
Wheelbarrow
Shop cabinet
Pipe threader
Post driver
Limb trimmer
Shingle cutter
Heavy duty snatch blocks
Bull float
3’ aluminum landscape rake
Elect. pole saw
Elect. chain saw sharpener
Conduit bender
Manual sand tamper
32” rolling magnet
Air framing nailer
Ridgid air roofing nailer
Stihl chain saw
Elect. chain saw
Saw blades
Roller stand
Dozens of rakes, hoes, shovels, axes, pitch forks, 3 tine hay forks, silage forks etc.
MISCELLANEOUS:
6’X8’ green house w/aluminum frame
Reese 5th wheel PU hitch
PU 5th wheel tail gate
Load leveler trailer hitch
Ball mounts
Aluminum cement chute
12’X20’ X8’ portable garage
Trash pump
40’ wood extension ladder
Jerry cans
Snow sled
Pipe fittings
Elect. supplies
Anti-freeze
Zareba fence charger
Several endless drive belts
(2) Cement mixers
Log chains
Chain binders
Come-a-longs
Tow bars
Large crane ball weight
Step ladders
Elect. motors
Aluminum Reese hitch cargo carrier
Aluminum appliance cart
Diamond plate PU toolbox
Scaffolding
Cable
Barn fan
Tractor parts of every description
Tandem axle trailer fenders
Truck & mobile home tires
Mobile home axles
Truck snowplows
Wrecker winch
Jeep tires & rims
Several long RR rails
VW engine
Adams Motor Grader #10 (no engine, scrap)
Wishing well
Sump pump
Quantity of scrap elect. wire
Several scrap engines
Scrap tractor frame
EXTRA LARGE AMOUNT OF MISCELLANEOUS ITEMS, SCRAP IRON & SCRAP FARM EQUIPMENT